Restore Rust Remover

Two types here for different usage in 250ml plastic bottles

The Liquid one is highly concentrated, full biodegradable RUST REMOVER so that 1 x 250 ml plastic bottle will, when mixed with water 19:1, make 5 litres of finished strength and can be used several times over. Just imerse your rusty tool or fitting and after 2 hours the rust will have been disolved. In very severe cases remove rinse with clean water and put back in for second dip. Unlike phosphoric acid or other based products, RESTORE  is approx pH neutral and will not attack good metal, plastics and non ferrous metals. Its recommended to remove wood handles. Once de rusting has taken place RESTORE leaves surface passive  so there is no problem with post-treatment "flash rusting" associated with acid formulations. The other good thing is that when you have finished with it you can pour the solution down the drain without damaging the enviroment.

The Gel one has been developed to de-rust larger flat surfaces and objects too large to fit into a small reservoir. Apply the gel with an abraisve pad or sponge and agitate gently for a couple of mins, rinse with clean water and dry thoroughly. Again RESTORE GEL is Ph neutral, bioegradeable and leaves a passivated surface.