Tikal TSC Plus Teak Deck Sealant

£21.53
VAT excluded

Over the last few years we have found that sourcing SIS 440 teak caulking at an affordable rate has become more and more difficult. Consequently, for the last 2 years, we have been experimenting in the yard with "Tikal TSC Plus Teak Deck Sealant" with great results.

TSC Plus has a greater Shore hardness, [35, to SIS 440 30] greater elasticity  [600% to 350%] and greater tensile strength [435psi to 350psi] TSC Plus can be sanded once cured, but will not take paint.

N.B. : Application Tool Required (Not supplied by TBS)

Volume
Quantity

 

Security policy (edit with Customer reassurance module)

 

Delivery policy (edit with Customer reassurance module)

 

Return policy (edit with Customer reassurance module)

Over the last few years we have found that sourcing SIS 440 teak caulking at an affordable rate has become more and more difficult. Consequently, for the last 2 years, we have been experimenting in the yard with "Tikal TSC Plus Teak Deck Sealant" with great results.

TSC Plus has a greater Shore hardness, [35, to SIS 440 30] greater elasticity  [600% to 350%] and greater tensile strength [435psi to 350psi] TSC Plus can be sanded once cured, but will not take paint.

N.B. : Application Tool Required (Not supplied by TBS)

Manufacturers hint:

Do not use any primer, as this will diminish the adhesion of the product, void the warranty, and may cause staining within the cured caulking. Only use a bond breaker tape when the joint width is greater than its depth (greater than a ratio > 1,3).

The bond breaker shall be placed at the bottom of the seam to create a parallel 2-side bond. The Bond breaker must be the same size as the joint itself. A second roll of tape, or preferably the tape core of the taperoll, can be used to guide the tape into the seam.

Avoid use of a backer rod, as this will not achieve a good, tight seal at the base of the seam. A proper caulk seam must fill the complete base of the joint.

16 Items

You might also like